Top 9 R410a Vacuum Pump Guage
708 reviews analysed
1. ZENY 3,5CFM Single-Stage 5 Pa Rotary Vane Economy Vacuum Pump 3 CFM 1/4HP Air Conditioner Refrigerant HVAC Air Tool R410a 1/4" Flare Inlet Port, Blue
- Inlet Port: 1/4″ Flare, Warm note: 1)Pressure Scale:0~400psi, 0~140psi 2)Length of hose:1.2m Red:1/4”-1/4” Yellow:1/4”-1/4” Blue:1/4”-1/4” Please make sure your manifold gauge is in accordance with this size. Any question in using, please contact seller first. *** A self-paying vacuum pump Adapter needed if inflet not suitable.
- High Efficiency and Low Noise, Heavy-duty Aluminum Alloy Casing, Oil Drain Plug Positioned at Bottom of Oil Reservoir,Internal High Volume Cooling Fan for Extended U
- Exhaust Port with Exhaust Cap, Direct Drive Motor Allowing Easy Starting Which is Maintenance Free
- Oil Sight Glass For Monitoring Oil Levels, ON/OFF Switch
- Non Slip Cushion Handle, Comes With a Bottle of Vacuum Oil
2. VIVOHOME 110V 1/3 HP 4CFM Single Stage Rotary Vane Air Vacuum Pump and R134a AC Manifold Gauge Set Kit with Leak Detector Carry Bag for HVAC Air Conditioning Refrigeration Recharging
- The VIVOHOME Vacuum Pump is perfect for maintaining air conditioning systems by removing moisture before refilling refrigerant
- Ergonomic grip handle of the air pump is designed for superior comfort and portability. It also comes with a bottle of vacuum oil so you can get started right away
- Manifold gauge set designed specially to measure pressure in refrigeration equipment. Carry bag is included for convenient storage and easy transpiration
- Color-coded hoses help identify high pressure side, low pressure side, and the filling hose
- perfect for maintaining R134a, R12, R22 and R502 air conditioning systems. NOT SUITABLE for R410a air conditioning systems
- Package includes 1 single stage vacuum pump, 1 bottle of oil, 1 leak detector and gauge set
- can be used both for automobiles and home air conditioning units
3. 6 Pieces Air Conditioning Refrigerant Angled Compact Ball Valve 1/4 Inch for R410A R134A R12 R22 AC HVAC and R12 R22 to R134A Adapters 6015 R134A Refrigerant Tank Adapter 6014 Vacuum Pump Adapter
- Package includes: you will receive 3 pieces R12 R22 to R134A vacuum pump adapters refrigerant tank adapters, and 3 pieces air conditioning refrigerant angled compact ball valves, easy to match and convenient for your replacement
- Angled ball valves: in the package are 45 degree angle manual shut-off valves with 1/4 inch SAE male and female fitting
- For quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar)
- Vacuum pump adapters: these adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools
- Easy to install: you can just tighten the adapter and get a good seal easily with hand, the adapters feature quick and easy connection and disconnection with high flow
- The ball valve can applied to hoses for charging and recovery, suitable for refrigerants R134a, R410A, R22 and R12 charging hoses or manifold, useful tools for HVAC, AC, car air condition maintenance
- Confident to use: made of copper, all angled ball valves and adapters in the package are durable for long-term service, provide simple and easy operation and installation, strong sealing for durability and safety
Angled ball valves:
45 Degree angle manual shut-off valves with 1/4 inch SAE male and female fitting, quick finger-tightening, the couplers nuts are deeply knurled designed for fast operation, the burst pressure ranges from the maximum 800 psi (55 bar) to the minimum 4000 psi (276 bar).
3 Pieces color coded shut valves can be operated with one hand, screws onto charging hose end.
Vacuum pump adapters:
Adapters for: 1/4 female flare x 1/2 male Acme.
These adapters are necessary for vacuum pumps, can adapt R12, R22 systems and R134a systems, are nice adapters for charging and service tools.
Quick and easy connection and disconnection with high flow. Corrosion resistance, ductility at high temperatures, and low magnetic permeability, build to last in your tool box for decades.
Angled compact ball valves:
Size: 4.9 x 3.7 x 0.9 inches
Weight: 10.7 ounces
Color: as shown in the picture
Compatible with: R410A, R134A, R12, R22, R502, AC, HVAC refrigeration charging hoses
R12 R22 to R134a adapters:
Size: 2.6 x 1.6 x 4.4 inches
Suitable for: R12, R22 systems and R134a systems
3 x Angled compact ball valves
3 x Vacuum pump adapters
The brand names we mentioned just for adaptability of products, are not for trade mark using, kindly noted.
4. YaeTek Rotary Vane Vacuum Pump Advanced 5 CFM 2 Stage 1/2HP HVAC with Gauge
- 1.Voltage: 110V, 60Hz / Power: 1/2HP
- 2.High Efficiency and Low Noise, Heavy-duty Aluminum Alloy Casing ,Internal High Volume Cooling Fan for Extended U
- 3.Exhaust Port with Exhaust Cap, Direct Drive Motor Allowing Easy Starting Which is Maintenance Free
- 4.Two-stage Design – Cleans the system more thoroughly than a single-stage pump, the second stage starts pumping at a lower pressure so you can pull a deeper, ultimate vacuum
- 5.The sight glass on the front of the pump shows you when enough oil has been added
5. FJC 6014 Vacuum Pump Adapter
6. BingSnow 6 Pcs R410a Mini Split Adapter Charging Vacuum Port Adapter Brass Converter with 5/16" Female Quick Couplers to 1/4" Male Flare for Mini Split HVAC System
- 【Material】Made by high quality pure copper, last long. Easy to operate and install, strong sealing for durability and safety.
- 【convenient】With 45 angle on the service port site for easier access.
- 【Compatible】Used on most newer R410A ductless mini split systems. Perfectly fits for R410a mini split system air conditioners, HVAC and refrigeration service.
- 【Design Skill】In the course of the operation, the thimble will not open the air conditioning core tube, completely solve the problem of fluoride leakage injury, security is guaranteed.
- 【Package】6 x R410a adapter with 6 x PTFE gasket and protective covers,6 x rubber gasket(Extra bonus).
Material: Pure copper
Connectors: 5/16″ Female Quick Couplers to 1/4″ Male Flare
Thread diameter: 0.47 inch(12 mm)
Thread size: 11mm
Total size: diameter: 0.63 inch/ 16 mm, 2.09 inch(53 mm)
In the course of the operation, the thimble will not open the air conditioning core tube, completely solve the problem of fluoride leakage injury, security is guaranteed.
Brass construction, quick connect, good tensile strength, resisting corrosion and AC low-loss fitting.
6 x R410a adapter with 4pcs PTFE gasket and protective covers.
6 x green rubber gasket(Extra bonus).
The material of this product is pure copper. The surface is changed into brass after copper was oxidized.
Due to manual measurement, please allow a slight deviation in size.
Please carefully align with the model you need to purchase. The R410A mini split system is usually equipped with different charging port sizes to avoid loading the wrong refrigerant into the system (such as R22).
7. INCLAKE Manifold Gauge Set, Diagnostic A/C Tool Kit for 410a Refrigerant, Brass HVAC Service Set with 5 Feet Hoses, 1/4 Inch Fittings, Adjustable Couplers and Can Tap Included, Updated
- 【Safety and Environmental】New design of manifold gauge filling and vacuum port effectively prevents mist or leakage of the refrigerant can.
- 【Range and Pressure】 Blue gauge (low): 0-500 PSI
- Red gauge (high): 0-800 PSI. Max working pressure: 800PSI, Burst pressure: 4000PSI.
- 【Widely used】Widely used for household air conditioning units
- Refrigerator, air conditioner and industrial refrigeration equipment.
- 【Easy to operate】Easy to operate and install, strong sealing for durability and safety. Necessary tools for HVAC, air condition maintenance and coolant or Freon adding.
- 【You will get】 1) A pressure gauge set
- 2) Three colored hoses ¼” inch fittings, with length of 5 ft
- 3) Two adjustable joint
- 4) 2pcs Non-adjustable joint (for R-134a and R-22)
- 5) 1pc valve core remover
- 6)1pc detailed user manual
8. OrionMotorTech 5FT AC Gauge Set for R134A R12, R22, R502 Refrigerants, with Couplers and Can Tap
- Upgrade 3-way air conditioning diagnostic manifold gauge set for R134A R12 R22 and R502 refrigerants. Designed for AC freon charging, evacuation (vacuum), diagnostic check and recovery work.
- Include 3pc 5FT extra long freon charging hose, 3 color for easily recognition, red for high pressure, blue for low pressure, yellow for refrigerant bottle.
- Blue Gauge (low): 0-350 PSI ___ Red Gauge (high): 0-500 PSI ___ Burst pressure: 3000PSI ___ Max working pressure: 600PSI ___ Celsius degree unit with easy to read instrument panel.
- Made from solid bass + aluminum + PVC + plastic, stands up to heavy use and accidental drops, ideal for professional auto mechanics. Include a detailed parts diagram and step by step instructions to help novice.
- You will get: 1pc 3-way HAVC freon gauge (1/4″ male) ___ 3pc hoses (1/4″ female) ___ 2pc quick couplers (1/4″ male) ___ 1pc ACME adapter (1/4″ Male to 1/2″ Female) ___ 1pc can tap (piercing-style) (1/4″ male)
9. Pioneer Ductless Mini Split System Charging Vacuum Port Adapter Swivel Type, 5/16 Female, 1/4 Male SAE
New R410A Ductless Mini Split Systems are usually equipped with a different charging port size to avoid charging of wrong refrigerant into the system (i.e. R22). This new port size is 5/16″ SAE and some gauge sets carry 1/4″ SAE connectors. Port adapter converts the 5/16″ SAE ports to use with 1/4″ SAE gauge sets.
By our suggestions above, we hope that you can found R410a Vacuum Pump Guage for you.Please don’t forget to share your experience by comment in this post. Thank you!