Finding your suitable readers for cooling fan nut is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling fan nut including detail information and customer reviews. Let’s find out which is your favorite one.
743 reviews analysed
1. (Pack of 2) Engine Radiator Cooling Fan 12 Inch Curved Blade Ultra Thin Universal High Performance 12V 90W Motor，Radiator Fan With Fan Mounting Kit（Puller and Pusher Design）
- The package includes: 2 cooling fans, 2 sets of mounting bracket accessories.
- Basic parameters: The maximum outer diameter is 12 inches. The thickness is 2.49 inches. Maximum air volume CFM = 1650CFM. Maximum fan RPM = 2500RPM. 10 S-shaped blades. 12 volts. 7.6AMPD RAW. 90W.
- OE accessories or replacement. Push-pull. Switch the push-pull working mode: only need to replace the power cord and turn the fan blade over to install. When turning the fan blades, apply anti-loosening glue to the fixed nut to prevent the nut from loosening.
- According to the size of the installation location, the cooling fan with the correct size should be selected so that the ideal heat dissipation effect can be achieved.
- This product is a universal product, which can be used to replace the original car parts, enhanced heat dissipation of agricultural machinery, enhanced heat dissipation of equipment, greenhouse ventilation, and attic ventilation. Just need a suitable installation location and matching power supply, it will not let you down.
The electric slim fan is lightweight, has an ultra slim design so the fan can be installed flush against your radiator, or other applications. It comes with the universal fan mounting kit which make it easy to install. The fan can be used in a wide variety of other applications as well, including A/C condenser cooling, mounting on an intercooler to prevent heat soak during drag racing events, or cooling the radiator in a water-to-air intercooler setup
Puller and Pusher Design：
Puller fans mount on the engine side (back) of the radiator core and pull air through the radiator core. The fresh airflow is pulled through the grille, then pulled through the core, and exits out the back side of the radiator. Puller fans are the desired and most common way of mounting a fan when space is not a limitation between the front of the engine and the back of the radiator core.
Pusher fans mount on the grille side (front) of the radiator core and push air through the radiator core. Fresh airflow enters through the grille, then is pushed through the radiator core, and exits out the back side of the radiator. Pusher fans are used typically where there is a limited amount of space for a properi sized puller fan.
2. Aisin FCT-013 Engine Cooling Fan Clutch
The fan clutch is a vital cooling mechanism that provides fan speed control in proportion to engine revolutions per minute. Engineered to exacting original equipment specifications, Aisin fan clutches quickly adjust to temperature changes to provide efficiency and control while providing optimal cooling performance without sacrificing engine efficiency. Aisin fan clutches are always original equipment matched. Aisin is a leader in the development and production of high-quality original equipment matched components and systems for the automotive industry.
3. Orion Motor Tech VW3120100 OEM Engine Radiator Cooling Fan Assembly Low Noise for Volkswagen Jetta Passat Golf
- 【1】 Interchange numbe: VW3120100
- 【2】 Fan blade/shroud material: Plastic
- 【3】 Fitment: VW Beetle Golf Passat Rabbit Jetta
- 【4】 Check “product information>
- technical details>
- application.pdf” to ensure this is the correct part for your needs
- 【5】 OEM part number: 1K0959455DT 1K0959455DH 1K0959455ET 1K0959455FJ 1K0959455FR 1K0959455P 1K0121207BB9B9
4. 6-Inch Versatile Fan, 10000mAh Battery Powered Clip On Fan With 53H Long Working Time, 4 Speeds, Strong Wind, Sturdy Tripod, 360° Rotate Ultra Quiet USB Fan for Stroller Treadmill Tent Car Seat Crib Bike
- 【10000mAh Huge Battery Capacity】This battery operated fan is configured with 10000mAh massive capacity Li-ion battery, supports up to 53 hours long time working at the highest speed with a full charge, and even longer time at the lower speed settings. Bring it out and let cool breeze be anywhere with you, free from the inconvenience of hunting for a power source for over a whole day. Easily connect to a laptop, power bank, car charger and other USB-enabled deices to get charged.
- 【Powerful Wind & Ultra Quiet】4 speeds available for your choice, the clip on fan enables instant cooling with strong airflow. Built with high-speed copper brushless motor which is stable and durable, lowers the noise level efficiently (less than 57dB), and greatly extends the service life of the fan. It never disturbs while you take a nap or rest, creating a comfortable and relaxing environment for you to enjoy this feeling of tranquility.
- 【Flexible Tripod & 360° Rotation】Born to be flexible and practical, the USB fan is specially designed with innovative and cute-shaped octopus tripod. The non-fragile tripod is made from extremely durable material for long lasting, and is proven sturdy after thousands of times of strict testing. Connected by movable knob between the fan head and tripod, the fan can be adjustable in 360 degrees horizontally, let wind follow wherever you are.
- 【High Versatility Fan for Summer】This compact personal fan is an ideal summery gift for kids and adults. The octopus tripod ensures that the fan can be winded, hanged, stood or hand held, satisfying the need to use in different occasions. You could clip the fan on baby stroller, crib, golf cart, tent, bedside, wheelchair and more, or you are able to place it on the desktop in the office, helping you focus on work with cool breeze. Plus, it is an attractive toy for kids to play with much fun.
- 【What You Will Get】(1) 10000mAh Versatile Fan
- (2) Nut
- (3) Tripod
- (4) USB Cable. We offer timely and considerate customer service, please feel free to contact us if any questions or concerns. We’ll reply within 24 hours.
5. Wathai 80mm x 25mm 12V 2Pin DC Brushless Cooler Cooling Fan
- 1 Piece fan include fan grill and mounting screws & nuts
- Rated Voltage:12V 0.2A
- Speed: 2800RPM
- Air flow: 43.6CFM
- Bearing type: Sleeve Bearing
- Life: 35000 hours
- Connecter: XH2.54-2Pin
- Cable Length: 30cm Or 12 inches
- Dimension: 80mm(L) x 80mm(W) x 25mm(H) / 3.15×3.15×0.98 in. per fan
Package include: 1 Piece fan include fan grill and mounting screws & nuts
Rated Voltage:12V 0.2A
Bearing type: Sleeve Bearing
Air flow: 43.6CFM
Cable Length: 30cm Or 12 inches
Life: 35000 hours
Weight:60g/pcs or 2.1oz
6. HIGHFINE 12cm 120mm 200CFM 4000RPM CPU Cooling Fan FFC1212DE 12V DC 3-Pin 3-Wire PC Computer High CFM Cooling Case Fan with Metal Finger Guard Grill
- Most Powerful of All 120mm Fans, Ultra Strong Monster, High Quality Long Life
- Model: FFC1212DE, Size: 120mm x 120mm x 38mm, Dual Ball Bearing, Speed: 4000 RPM, Air Flow: 200 CFM, Noise Level: 59dBA
- Power: 12VDC 3.0A 36W, 3-Wire 3-Pin Connector with Speed Sensor, Cable Length: 28cm, Weight: 400g(14 ounces)
- This super high-cfm-speed fan design for big pc or server CPU cooling component, also could be used for refresh air for your Underground Garage, Cellar or anyother space you want
- Package Includes: 1x High CFM Fan + 1x Metal Finger Guard Grill + 4x screws and nuts
This is an Ultra Strong and high flow rate DC Fan and you will be amazed by the amount of wind it blow!
Ideal for computer cooling system ,any other kinds of cooling or help your space be full of fresh air, and you won’t be disappointed.
Must be careful for the blades as it spins in very high speed!
This item provide a Silver Metal Grill on the fan back side for safety.
Bearing: 2 Ball
Max speed: 4000+/- 10% RPM
Noise Level(max): 59dBA
Power Connector: 3-pin 3-wire
Wire length： about 28cm
Rated Voltage: DC 12V
Operating Voltage Range: 7 – 13.2V
Input Current: 2.4A (3.0A max)
Input Power: 36W
FAN size: 120mm x 120mm x 38mm(4.725″ x 4.725″ x 1.5″)
Item weight: 400g (14 ounces)
1 x Ultra Strong 120mm Cooling Fan
1 x Silver Metal Grill
4 x screw and nuts
Note:I have to say it’s the MOST POWERFUL OF ALL 120mm FANS, a Monster of fans,super power of move a considerable amount of air.This fan is a little loudly when worked on. If you don’t need it too much power,you can add a Speed Controller by yourself,Instructions are not included however multiple videos are available on YouTube. We have many type of fans sell on amazon,if you have any questions about product,Pls contact us by email.
7. Wathai EC Axial Fan AC 110V 115V 120V 220V 240V Brushless Cooling Fan 80mm x 25mm
- This EC axial fan consume very less power & better efficiency than AC equivalent.
- Designed for projects that requires cooling or ventilation
- or as a replacement fan for various products.
- Dual-ball bearings have a lifespan of 67,000 hours and allows the fans to be laid flat or stand upright
- Package include: 1 Piece fan include fan grill and mounting screws & nuts
- 2* leadwires（about 38 inches)
- 1* Power Plug
- 80 x 80 x 25 mm ( 3.14 x 3.14 x 1 in. ) | Rated Voltage :90V to 270V | Airflow: 43.6 ±10%CFM | Power: 2W | Speed: 2800 RPM
EC Fan What is EC technology?
EC stands for Electronically Commutated, and it combines AC and DC voltages bringing the best of both worlds; the motor runs on a DC voltage, but with a normal AC supply.
EC motors have several benefits. Because EC motors have no brushes, they do not spark or have a short life due to brushes. Other advantages include the fact that they do not waste power because the electronics control the stator; they provide better performance and controllability, and they run cooler than induction motors; In terms of size, small motors can achieve the same output as traditional DC or AC motors.
Power distribution is much cleaner with an EC motor. Brushless DC motors depend on a separate DC power supply. And an AC motor’s power supply usually adds extra cost and complexity. EC motors can connect directly to AC main power supply with their integrated electronics. They do not completely depend on voltage or frequency; hence, small changes in voltage do not affect motor output.
The EC fan is more windy than the AC fan, more energy efficient, and can work in the 70V – 270V voltage range, such as work under on 110V, 120V, 220V, 240V ,the fan speed are the same.
Rated Voltage: 90-270V
Power: 2.0 Watt
Speed: 2800 ±10%RPM
Air Flow: 43.6 ±10%CFM
Cable Length: 300mm (11.8 inchs)
1 Piece fan include fan grill and mounting screws & nuts
2* leadwires（about 38 inches).
1* Power Plug
8. 12" inch Slim Fan Push Pull Electric Radiator Cooling Fans 12V Mount Kit Unversal Black
- √ Comes with mount brackets and tie straps kit
- √ Maximum Fan CFM=1750 CFM, Maximum Fan RPM=2250 RPM
- √ Size: 12 Inch, Thickness: 2.5 Inch
- √ 10 Blades, 12 Volts, 6.6 AMP DRAW, 80W
- √ A customer said that the fan was not available. We put the instructions on the main picture for reference. Thank you. You can contact us if you have any questions.
— 100% brand new,never been used
— Maximum Fan RPM=1730 RPM
— 10 Blades
— 12 Volts
— 6.6 AMP DRAW
— Easy direct installation, require NO modification
— Size: 12″
— OE Fitment or Replacement, Push or Pull Type
— 1x cooling fan blade
— Come with Hardware and Mounting Kits
9. MYHMZCYCLE Computer Cooling Fan Mount Screws Pack of 50
Color: Black Package includes: 50 screws
10. Orion Motor Tech 32mm Fan Clutch Nut Wrench, Water Pump Holder Removal Tool Kit for BMW E34 E46 E90 E39 E36
- Designed to remove water pump on models with temperature dependent viscosity drive fans.
- This fan clutch wrench allows users to remove lock nuts on the thermo-viscous fans.
- Suit for: M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32.
- Made of steel for durability with long lifespan.
- Dimensions: wrench is 14.7″ long
- holder is 14.9″ long, 0.2″ thickness.
Wrench Length: 14.7″
Holder Length: 14.9″
Wrench Opening: 1.3″
1 x Wrench
1 x Holder
By our suggestions above, we hope that you can found Cooling Fan Nut for you.Please don’t forget to share your experience by comment in this post. Thank you!