The Best Cooling Fan 6000Rpm

0

Finding your suitable readers for cooling fan 6000rpm is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for cooling fan 6000rpm including detail information and customer reviews. Let’s find out which is your favorite one.

582 reviews analysed

1. Cooling Fan for Antminer Bitmain 7000RPM Dual Ball Bearing 4-pin Connector, 120x120x3.8mm / 280CFM T15, S11, S15,DR5 S9i, S9j, S9, S7 V9, T9, A3, D3, L3+, L3++, E3, Z9, Z9 Mini. Also for GPU Miners

Cooling Fan for Antminer Bitmain 7000RPM Dual Ball Bearing 4-pin Connector, 120x120x3.8mm / 280CFM T15, S11, S15,DR5 S9i, S9j, S9, S7 V9, T9, A3, D3, L3+, L3++, E3, Z9, Z9 Mini. Also for GPU Miners

Feature

Description

Brand New Antminer Bitmain Fan Replacement Dual Ball Bearing / Works for ALL Bitmain products like S11, S15, S9i, S9j, S9, S7, S5, V9, T9, D3, A3, L3+, L3++, E3, Z9, Z9 mini, X3 and more. Also works for GPU miners / 120*120*3.8mm /// SHLF1212CHE-03 / Cable Length: 10 inches / 25 cm / 3 Month Warranty

2. Noctua NF-A14 iPPC-2000, Heavy Duty Cooling Fan, 3-Pin, 2000 RPM (140mm, Black)

Noctua NF-A14 iPPC-2000, Heavy Duty Cooling Fan, 3-Pin, 2000 RPM (140mm, Black)

Feature

3. Everflow 60X60X15mm Dual Ball Bearing Ultra High Speed PWM Fan # R126015BU

Everflow 60X60X15mm Dual Ball Bearing Ultra High Speed PWM Fan # R126015BU

Feature

Description

Everflow 60X60X15mm Dual Ball Bearing Ultra High Speed PWM Fan # R126015BU

4Pin PWM Connector w/8″ Tail

Features:
Bearing Type: 2 Ball Bearing
Material: Housing Plastic (UL: 94V-0)
Impeller Plastic (UL: 94V-0)
Protection: Current limit/ Impedance
Operating Temp: -10-70C

Specifications:
Rated Voltage (V): 12
Operating Voltage Range (V):
Rated Current (Amp): 0.40
Rated Input Power(W): \
Rated Speed (rpm): 2000 ~ 6000
Maximum air Flow: (1)CFM: 9.4 ~ 29.8
Maximum Static Pressure (mmH2O): 0.71 ~6.42 mmH2O
Sound LeveldB(A): 20 ~42

4. Portable USB Rechargeable Neck Fan, Waistband Fan, Working Cooling Fan Hand Free Personal Fan Wearable Cooler Fan for Traveling Working Outdoor Office (6000mAh) …

Portable USB Rechargeable Neck Fan, Waistband Fan, Working Cooling Fan Hand Free Personal Fan Wearable Cooler Fan for Traveling Working Outdoor Office (6000mAh) …

Feature

Description

Size:6000mAh

Specifications: Product size: 79 * 51 * 109mm / 3.11 * 2.00* 4.29in Product weight: 0.28kg / 0.61lb Product material: PC Battery capacity mah:6000 mAh Output power W: 3.6W-5W Input: DC 5V Fan speed : Low, Mid , High RPM: low-3600 RPM; mid-4300RPM; high-5000 RPM Noise: < 42db="" (="" quiet)="" package="" list:="" 1*="" fan,="" 1*="" usb="" charging="" cable,="" 1*="" neck="" strap,="" 1*="" user="" manual="">

5. 2pack 50mm x 15mm 5015 12V Dual Ball Bearing DC Brushless Cooling Blower Fan BB5015H12 with 2 Pin Terminal UL TUV

2pack 50mm x 15mm 5015 12V Dual Ball Bearing DC Brushless Cooling Blower Fan BB5015H12 with 2 Pin Terminal UL TUV

Feature

Description

Color:2pack 50x50x15mm fan

Description:
Model: BB5015H12
Name: 12V DC BRUSHLESS FAN
Rated Voltage : 12V DC
Operation Voltage: DC 5-13.2V
Consuming Current : 0.23A(0.35A Max.)
Consuming Power: 2.7W(4.2 Max.)
Connector: 2pin-ph2.5
Rated Speed: 6000 R.P.M.
Max. Air Flow: 3.87CFM
Iife Expectance: 50,000 hours at 40 degree
Insulation Level: UL Class A
Certificate: UL,CE,TUV
Acoustic Noise: 16.0dB***
DC Line Length : 120mm
Rotation Direction: Clounter-clockwise
Size:50x50x15mm
Size:20g

***:Noise is measured at rated test condition in semi-anechoic chamber in free air with microphone at a distance of 1m apart from the axis of fan at intake side.

6. 4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

4PCS 4010 3D Printer DC Brushless Blower Cooling Fan Oil Bearing with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino Other Small Appliances Series Repair Replacement

Feature

Description

Color:12V

This helps to prevent the heat from the nozzle traveling too far upwards.
Without this fan, the filament could get soft above the heater block, which leads to extrusion issues and degradation of print quality.
This is a DC 12V 0.08A cooling fan.
Dimensions are 40mm x 40mm x 10 mm.
Sufficient for use in 3D printing, operating speed is 6000 RPM.
Equipped to properly cool your 3D printer’s extruder assembly, this extruder fan is compatible with the MakerBot Replicator 2 and MakerBot Replicator 2X.
Also compatible with Flashforge, CTC, and other 3D printer types.

 

Specification:

Rated Voltage: DC 12V

Consuming Current: 0.08A

Connector: 2pin-ph2.5

Speed: 6000 + -10% RPM

Air Flow: 6.5 CFM

Static Pressure: 2.9

Noise Level: 27dBA

Note: Any questions, you can contact us and we will give you a satisfied solution!

Notice!!!

Please check the fan plug, maybe the plug was wired opposite of the fan it was replacing, that is reverse polarity.

7. GDSTIME 40x40x20mm 40mm 4cm 12v Dc Brushless Cooler Cooling Fan

GDSTIME 40x40x20mm 40mm 4cm 12v Dc Brushless Cooler Cooling Fan

Feature

Description

Package include:1 Piece fan include mounting screws & nuts
Dimensions: 40x40x20mm
Connector:XH2.54-2P
Rated Voltage: DC12V
Rated Current: 0.08Amp
Rated Speed: 6000 RPM
Air flow: 7.85 CFM
Noise: 21 dBA
Bearing Type: Sleeve Bearing
Life: 35000 hours at 25 degrees
Cable Lenght: 20cm or 8 inches
Weight: 23g or 0.8oz

8. GDSTIME 50mm x 50mm x 12mm 24v Dual Ball Bearing Brushless Cooling Fan

GDSTIME 50mm x 50mm x 12mm 24v Dual Ball Bearing Brushless Cooling Fan

Feature

Description

Package include: 1pcs fan
Dimensions: 50x50x12mm
Connector:XH2.54-2P
Rated Voltage: DC:24V
Rated Current: 0.05 Amp
Rated Speed: 6000 RPM
Air flow: 12.5 CFM
Noise: 28.5 dBA
Bearing Type: Dual Ball Bearing
Life:50000 hours
Cable Lenght: 200mm
Weight: 21g/pcs

9. 3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

Feature

10. M.2 Enclosure M.2 NVMe Enclosure Tool-Free Aluminum NVMe SSD Enclosure M.2 Nvme SSD Enclosure with Built-in Silent Fan Cooler USB C and USB 3.1 NVMe Enclosure Support M.2 Nvme SSD 2280 2260 2242

M.2 Enclosure M.2 NVMe Enclosure Tool-Free Aluminum NVMe SSD Enclosure M.2 Nvme SSD Enclosure with Built-in Silent Fan Cooler USB C and USB 3.1 NVMe Enclosure Support M.2 Nvme SSD 2280 2260 2242

Feature

Description

Color:Tool-Free + Built-in Silent Fan

The Gen 3 Speedbyte Nvme Enclosure Have Combinated Tool-Free And Bulit-In Slient Fan Function In One Device. No More Screws And 100% Tool-Free. Aluminum Alloy Shell And Bulit-In Fan Can Achieve 3X Heat Dissipation Effect Of Other Ordinary Ssd Enclosures.

Features:
1. Ultra fast 10Gbps USB 3.1 transfer speed, widely compatible with M.2 NVMe SSD in M Key spec and size of 2280, 2260, 2242, 2230
2. Bundled with silicone thermal pad for better cooling down during high speed transfer.
3. Supports Hot-swapping, plug and play function, instant connection when plugged to PC.
4. Built-in silent fan for positive heat dissipation, 5V 6000 RPM, smart active when connecting to PC or mobile phone.
5. 1-2 minutes of intelligent sleep.

Internal Interface:M.2 M-Key
External Interface:USB3.1 Gen2 Type-C
Control chip:JMS583(10Gbps)
Support SSD:M.2 NVMe SSD 2280, 2260, 2242
Transfer Speed:USB3.1 Gen 2 10Gbps(Theoretic)
Supported OS:Windows/Linux/Mac
Product material:Aluminum alloy shell+ stainless steel + Built-in silent fan PCB
Cable length:22.5cm/9.44 inches
Adapter:USB Type-A to C adapter

System requirements:
Windows: 7, 8, 8.1. 10 (Both 32-bit & 64-bit versions)
MAC: OS X
Linux

Package Contents:
1 x Speedbyte Gen 3 NVMe enclosure(TOOL-FREE & Bulit-in slient Fan)
1 x USB 3.0 (Type-A) cable
1 x USB Type-C cable
1 x Portable rope

Conclusion

By our suggestions above, we hope that you can found Cooling Fan 6000Rpm for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Preview
Logo
Enable registration in settings - general