944 reviews analysed
1. Cen-Tec Systems 37737 12" Combination Hard Floor and Carpet Vacuum Nozzle
- The 12” 37737 is designed for silent movement on hard floor with a wrap around nylon brush and low noise wheel. The brush is retracted using and on the tool rocker switch and then is suitable for all carpeted surfaces. The 1 ¼” neck of the tool double pivots to follow you through the vacuuming motion keeping the face of the tool at the ideal angle to insure cleaning performance.
- The stainless base plate has deep channels to the tool edge to insure excellent edge cleaning and maximum air flow for capturing debris. Two lint strips in front of and behind an oversized channel capture lint and fibers from the carpets surface and help direct them into the air stream.
- The brush is supported with a stamped steel back plate to insure uniform support for the brush when on hard floor surfaces and protecting the base of the tool from damaging sensitive surfaces.
- The oversized pedal is easily operated with the foot to ease transitions from carpet to hard floor making the 37737 ideal for today’s home with a mix of floor surfaces.
- Compatible with all canister vacuums, central vacuums, and commercial back pack vacuums using 1.25” accessories
The 37737 is a premium nozzle for both hard floor and carpeted surfaces. The tool is virtually silent when moving across hard floor surfaces due to the oversized wheel located just under the double pivot neck. The neck pivots first at the tool and then at the neck base to insure maximum cleaning performance. The 37737 is compatible with all canister vacuums, commercial back pack vacuums using 1.25” accessories, and all major brands of central vacuum including Beam, Electrolux, Vacumaid, Cyclovac, MD, Vacuflo, Canavac, Nutone, Eureka, and Imperium. To confirm the 37737 consider the nozzle end of your wand or extension tube. If it has a connection without a button and measures approximately 1.1/4” on the outside surface, it should be compatible. The 37737 is not compatible with several brands of European vacuums like Miele which require a 1.375” neck.
2. Cen-Tec Systems 92927 Central Vacuum Power Nozzle Kit
- Central vacuum package includes a power nozzle, integrated electric telescopic wand, and 35 foot total control electric hose allowing you to control both the vacuum and the nozzle from the hose handle
- The 14Wide power nozzle has a chevron agitator design shown to provide superior cleaning performance
- Compatible with all major brands of central vacuums including beam, Electrolux, eureka, vacumaid, vacuflo, nutone, cyclovac, canavac, husky, star power, md, and imperium
- 35 foot crush proof total control hose lets you turn your central vacuum on and off from the hose handle independent of the power nozzle
- Premium American made dusting tool, upholstery tool, and crevice tool can be caddied on the wand using the provided tool clip letting you take them along for faster cleaning
The Cen-Tec 92927 central vacuum accessory package is designed to provide superior cleaning for today’s home with both carpeted and hard floor surfaces. The power nozzle is designed to provide the three features most sought in cleaning. Excellent deep down dirt recovery, excellent Grooming of the carpeted surface, and superior edge cleaning. The life time reinforced poly-V belt will provide years of reliable service without the need to routinely Replace the Drive belt. The 35 foot total control hose is the longest permitted by UL/CSA standard so you are sure to reach all areas of your home. Customers most often request a hose Sock to protect the investment in their home and furnishing and we have recognized this by pre-installing a premium Sock treated with an anti-microbial to protect you and your home environment. The universal hose end makes the 92927 compatible with all major brands of central vacuums including beam, ELECTROLUX, eureka, VacuMaid, Vacuflo, Nutone, Cyclovac, Canavac, husky, star power, Md, and imperium brands. The 14 inch wide power nozzle has a chevron agitator design shown to provide superior cleaning performance. The quiet Drive poly-V Drive system reduces vibration and noise while providing consistent power from the motor to the carpet agitator. The quiet Drive belt is set away from the edge of the nozzle to allow for brushed edge cleaning to both sides of the nozzle. A soft Bumper protects furnishing. A quick release wand system allows you to draw the wand for detail cleaning and quickly return to operation of the power nozzle. The nozzle is connected to the hose through a fully integrated telescopic electric wand.
3. Wessel Werk EBK 360 Power Nozzle with Integrated Wand for Central Vacuum Systems
The German engineering of the EBK360 by Wessel Werk means you can be sure you are getting a high quality, deep cleaning powerhead. With an impressive 5 position carpet height adjustments, quick neck release and wand release you get convenience plus versatility. The bright LED headlight will save energy and last longer than traditional headlights. The Wessel-Werk EBK360 has a rubber strip and soft rubber wheels making it ideal for use, not only on carpeting, but also on bare floors. With a chevron designed roller brush the effectiveness of the brush roller and it’s cleaning ability is maximized. Sale is for EBK360 and integrated wand only.
4. Central Vacuum Carpet Attachment Kit With Adjustable Height Electric Carpet Head – Brush Set Including 40ft Central Vac Dual Votage Switch Control Hose, Black & Grey – KIT-HV40CD-OVO
OVO carpet deluxe attachment kit is perfect for fully carpetted rooms as well as hard floors. This kit includes a 40ft switch control dual-voltage crushproof hose and a 6 height adjustable electric carpet beater, 12” deluxe floor brush (wood & tiles), electrical adjustable wand with button lock and an additional adjustable stainless steel wand, deluxe storage accessory organizer, chrome hose hanger, dusting brush, upholstery brush and crevisse tool.
5. EZ SPARES 1 1/4 inch 32mm Universal Vacuum Cleaner Euro Floor Brush Head Brush Attachment for Floor and Carpet Combo Tool New Designed to Fit Hoover, Eureka, Rainbow,Kenmore,Shop VAC
- Inner diameter is a standard 1.25″(32mm) size for most vacuum brands,please check the right size (Inner Diameter)
- It is a high quality brush with Anti-static cloth,PP hair and two pedals.
- 2 New Functions choose: The brush head is dual purpose brush with two models for floor or carpet.
- The brush will take good care of house floor and furniture without tired.
- This is a really good deal on a decent floor tool. Works well on carpet, or hard floors.
EZ SPARES 1 1/4 inch 32mm Universal Vacuum cleaner Brush Head Brush With Metal Base ,Metal Lifting , Plant Bristle , Double Pedals Fits Vaccum Brands Hoover?Bissell, Eureka, Dirt Devil, Rainbow…
Shipping List: 1 brush
The inner diameter:1 1/4 inch(32mm) . Please check the right inner diameter.
Applicable Model : For Most Vacuum Cleaner except Shark,Vorwerk.
Note: Please allow 1-3mm error due to manual measurement.
Since the establishment of our company in 2009,we have been committed to produce and supply the best spareparts of home appliances for the customers in the world.
Now we are offering the most comprehensive coverage of electrical appliance replacement parts for households over 40 countries.Choose EZ SPARES, we will be your good helper to provide a more convenient,comfortable and healthier lifestyle for you and your family.
6. Cen-Tec Systems 94764 CT25 Central Vacuum Electric Nozzle with Integrated Wand, Black
- Suitable for use with all major brands of central vacuums, including: Beam, Electrolux, Eureka, VacuMaid, Vacuflo, MD, Cyclovac, Canavac, Nutone, M&S, and Imperium with a flush mount hose
- Quiet Drive poly V belt for long life, which is positioned away from the end of the agitator, providing true edge cleaning to both sides of the nozzle
- Includes a four position height adjustment is ideal for use on both traditional or high density soft carpets
- Includes a soft molded bumper front and side bumper. A clear view window to confirm the agitator’s operation. Soft over molded wheels to run smoothly on carpet and quiet on hard floor surfaces
- A quick release neck permits the cleaning wand to drawn from the brush for above the floor cleaning
- Can be used as a replacement for a Nutone CT600 electric brush
- The fully integrated telescopic electric wand connects the CT25 to central vacuum and canister electric hoses with a flush plug position electrical connection.
Cen-Tec Systems is pleased to introduce the new response II CT25 power nozzle, which combines features typical of premium power nozzles with a unique self regulating air by pass system which automatically adjusts air flow to floor conditions permitting a true deep clean in a system designed to move freely over even the highest density soft carpets. Power nozzles on traditional carpets permit the air to flow under the agitator, traveling up and back carrying the dirt into the air stream. The new high density soft carpets prevent the air to enter through this traditional means. The challenge was to develop a solution which adjusts to meet carpet conditions while still keeping the air stream entering under the agitator for an effective clean. Other systems vent, but much of the air is wasted traveling over the agitator not under where it is most effective in carrying away dirt. The CT25 allows a self adjusting air relief entering through vents in the hood of the nozzle. The result is no wasted air flow, effective cleaning and a self regulating system that works as well on traditional carpets as it does on the new high density ultra soft carpets. Also includes a flush mount integrated wand.
7. Cen-Tec Systems 93048 Central Vacuum Kit with Switch Control, 40 Ft. Hose
- The lightweight highly flexible hose is made in the usa and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves
- Compatible with all major brands of central vacuum systems equipped with standard pin jack inlet valves, including: beam, electrolux, vacuflo, vacumaid, nutone, Hayden, md, canavac, cyclovac
- The wall end is designed to fit nutone and other inlets with a measured 1.50Diameter opening. The hose will work with standard accessories and any of the industry air turbine nozzles
- Comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a usa-made hard floor brush
- The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use
The 93048 kit has a two position on off switch hose which creates a Circuit through the two low voltage electrical contacts in your inlet valve. You will see the wall end has a two metal contact Plates separated by a thin plastic landing. These Plates create the Circuit through the switch in the hose handle that permits control of your central vacuum. There is a small tab projecting from the top of the hose end that helps you orient the hose in your inlet. This tab should be located at the top of the inlet valve opening as you insert the hose end. The wave combination nozzle is designed to move from carpets to hard floor without the need to make an adjustment. There is a simple friction connection between the floor nozzles and the end of the telescopic wand to make changing tools easier. The wand ratchets at one inch intervals from 25 to 42 inches so you can adjust to a height comfortable for your use. Many find the 93048 an ideal second package to complement their electric brush kit for the portion of the home dominated by hard floor surfaces like the kitchen, family room, den, or basement. An Italian made ratchet chrome telescopic wand with nylon collar and a full set of soft vinyl accessories are ideal for cleaning above the floor. The accessories include a 5 inch natural fill dusting tool, a 13 inch vented crevice tool, and 5 inch upholstery tool with a built in brush strip ideal for stairs and the sofa, a mesh caddy bag collects everything between uses and the mesh allows you to easily see the tool you need through the bag.
8. Cen-Tec Systems 93785 Premium Vacuum Attachment Kit with Telescoping Wand, Gray
- Designed to work with both conventional and electric hoses that have a button lock stub tube to engage the chrome telescopic wand included in the set. The wand features Cen-Tec’s exclusive button down feature that makes it easier to disengage the hose from the wand for above the floor cleaning and storage
- Includes a 12” pivoting neck natural fill floor brush in pearl gray. The brush is designed for use on all hard floor surfaces including hardwood, laminate, tile, stone, concrete, vinyl, and linoleum
- The soft bristles will not damage floors and effectively collect the dust and surface debris into the air stream through the window cut on the face of the nozzle where the vacuum pulls it away. Great for pet hair
- Also iincludes a 3” natural fill dusting brush with Cen-Tec’s exclusive square corner feature ideal for cleaning into square corners on table tops or shelves
- The 4” upholstery tool vented to insure airflow on soft surfaces. A slide on natural fill brush has a stiffer fill to help groom upholstery and lift off pet hair or fibers from the surface
- The 8” fluted crevice is ideal of corners, in the car, or on the stairs
- Telescoping ratchet wand allows the operator to fit the tools to their height, as well as extend the reach when vacuuming above the head or underneath furniture
- Compatible with major brands of central vacuums including Beam, Electrolux, Eureka, Honeywell, Vacumaid, Nutone, Canavac, Imperium, and Cyclovac. It is not recommended for use with Vacuflo, which has a unique shallow button and requires a different wand configuration
- All attachments included fit 1.25″ diameter vacuum connections
9. Cen-Tec Systems 93026 Central Vacuum Electric Kit with CT25, CT10, and 35 Foot Pigtail Hose
- Compatible with all major brands of central vacuums including, beam, ELECTROLUX, eureka, MD, Vacuflo, VacuMaid, imperium, star power, Cyclovac, Canavac, Husky, and Hayden
- The CT25QD power nozzle is designed to effectively clean traditional carpets as well as today’s new soft fiber carpets equally well. The CT25 has a unique venting system that insures optimal air flow
- The Ct10 is an industry exclusive power nozzle designed for cleaning hard floor surfaces, spot rugs, and Premium Area rugs moving from hard floor surface to carpeted surface without stopping
- 35 foot crush proof total control hose lets you control both the central vacuum power Unit and the power nozzle independently or together
- Includes 2 fully integrated telescopic electric wands, allowing you to keep one with each brush for convenient swapping back and forth
The 93026 central vacuum accessory set is unique to the industry in that it provides two electric power nozzles. One designed for all carpeted surfaces and a second that has been designed specifically for hard floor, spot rugs, and premium area rugs. Many homes now have a mix of flooring including hardwood, stone, tile, laminate, spot rugs, area rugs, and wall to wall carpeting. The 93026 is designed to expertly clean all of these surfaces. Both electric nozzles apply the latest technology and have the premium features expected in premium electric power nozzles. As suggested by customers two integrated electric wands are provide one for each power nozzle to add convenience and speed up the task that is cleaning. The 35 foot total control hose is the longest permitted by UL/CSA standards so you are sure to reach every part of your home. Customers have shown a strong preference for the hose to be socked to protect their fine furnishings, base boards, and floor surfaces so the 93026 has a premium anti-microbial sock pre-installed. The hose has an 8 foot electric cord making the 93026 compatible with all major brands of central vacuums including, Beam, Electrolux, Eureka, MD, Vacuflo, Vacuumed, Imperium, Star Power, Cyclovac, Canavac, Husky, and Hayden. The CT25QD power nozzle is designed to effectively clean traditional carpets as well as today’s new soft fiber carpets equally well. The CT25 has a unique venting system that insures optimal air flow under the chevron brush agitator for superior embedded dirt pick-up regardless of carpet type. The double swivel neck design makes the CT25QD the easiest nozzle in the market to control. The lifetime poly-v belt drive reduces noise and vibration. The belt is inset from the edge of the brush to insure brushed edge cleaning to both sides of the nozzle. The CT10 reduces cleaning time and addresses today’s home with a mix of floor surfaces. At 1.50# the CT10 is lightweight and easy to control.
By our suggestions above, we hope that you can found Central Vacuum Nozzle for you.Please don’t forget to share your experience by comment in this post. Thank you!