968 reviews analysed
1. Genuine Eureka DCF-21 Filter 68931 – 1 filter
Eureka filters capture helps household dust. Contains 1 filter per pack. Change filter up to every 6 months for optimum performance.
2. Bissell Pleated Post Motor Filter, 32076
- Upright vacuum replacement HEPA filter, for use in all Bissell clean view bagless vacuums #’S 35755, 35766, & 3596
- Adds Extra shine to your product
- Manufactured in China
- Style 7, 9 and 16
- Fits models – all cleanview series, powerglide platinum series
- Works with models – 3574, 35762, 35766, 20Q9, 35452, 82H1, 22C1, 21K3, 58F83, 3590, 44M3P, 84G9, 67F8, 35961
Bissell Pleated Post Motor Filter, 32076 – The post-motor filter assists in the filtration process to return clean air to the room. It is located behind the door on the side of the vacuum. When the filter becomes dirty, open the door, remove the filter and replace. The white, pleated post motor media filter is not washable.
This replacement pleated post motor filter (Style 7) fits Bissell’s Powerglide, Cleanview, and PowerTrak vacuum cleaner models. Designed to reduce the amount of allergens within an indoor space, this filter captures up to 99.9 percent of dust mites, pollens, and ragweed.
3. BISSELL 3204E Featherweight Series 3105, 3106, 3045 Filter (2-Pack)
Bissell 3106 Series Filters, 3204E – The key to maximum performance is a clean Filter. A dirty or worn filter can diminish the cleaning performance of your vacuum, so it is important to regularly clean, monitor and/or replace them.
4. Little Giant 554425 VCMA-20ULS Condensate Removal 1/30 HP Pump with Safety Switch
- CONDENSATE PUMP: Little Giant VCMA-20ULS (554425) 1/30HP Condensate removal pump features safety switch, ½ gallon ABS plastic tank and 6ft power cord.
- AUTOMATIC CONDENSATE PUMP: Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required
- LITTLE GIANT PUMP: This vertical-type Little Giant Condensate Pump features stainless steel motor shaft and galvanized steel tank cover. Thermally protected motor is UL and CSA listed. It includes Two 1-1/8” diameter inlet openings
- PUMP WITH SAFETY SWITCH: It includes safety switch can be connected to shut down the air conditioner condenser or wired to an alarm to warn of possible tank overflow. Discharge is a 1/4″ FNPT or 3/8″ O.D. barbed tubing adapter.
- CONDENSATE REMOVAL PUMP: The Little Giant VCMA-15UL is suitable for high-efficiency gas furnace applications that produce an acidic condensate. It has 1-year warranty. Extend the inlet piping into the tank from 1 to 3 inches to ensure that it will not interfere with proper float operation
Motor — 1/30 HP
Discharge — 3/8″ OD barbed
Housing/tank cover — ABS
Motor cover — ABS
Volute — ABS
Tank — ABS
Impeller — Glass filled polypropylene
Check valve — Acetal
The VCMA-20ULS has a ½ gallon tank capacity. Little Giant VCMA Series is ideal for collecting, detecting and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers and other equipment where an automatic drain pump is required. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
It is designed for automatic collection and removal of condensate from air conditioning, refrigeration and dehumidification equipment when gravity drainage is not possible or practical. Also suitable for high efficiency oil and gas-fired condensing furnace and condensing boiler equipment.
From the Manufacturer
Little Giant VCMA Series is ideal for collecting, detecting, and the automatic removal of condensate from air conditioning equipment, de-humidifiers, high efficiency furnaces, condensing boilers, and other equipment where an automatic drain pump is required. The VCMA-20ULS features a stainless steel pump shaft, a snap-action pump switch, a removable 3/8 inch barbed check valve, a 6 foot power cord, and a 1/30 horsepower high performance motor with thermal overload protection. The pump also features an ABS tank, ABS motor cover, and ABS volute. With a check valve, the VCMA-20ULS pumps 80 GPH (with a discharge head of one foot). The pump’s tank has a capacity of 1/2 gallon.
5. BISSELL Style 7 Filter Kit, 3093
- It is recommended to clean or replace your filters every 3-6 months depending on use
- The foam filters are washable – clean by hand washing in warm water. A mild detergent may be used if desired. Allow the filter to air dry completely before replacing
- It’s a good idea to buy an extra filter to always have a dry one ready to use!
- Depending on your household, your friends at BISSELL recommend cleaning or replacing your filters frequently and more often if you have pets that shed and family/friends that track in dirt and debris
- See the description below to see if this accessory fits your vacuum!
Genuine BISSELL parts. Includes 1 pre-motor foam circular filter and 1 pre-motor square filter for List-Off resolution, Lift-Off bagless, Cleanview Helix and Powertrak Series. Works with: LiftOff Revolution Bagless Pet Vacuum (37604, 3750, 37601, 37602, 37605, 37606, 37607, 37608, 3760H, 3760J, 3760P, 3760R, 3760T, 3760V, 4220, 42209, 4220P, 6595, 65951, 6595P, 6850, 6860H, 6860X), Velocity Upright Bagless Vacuum (75B21, 75B2), CleanView Revolution Deluxe Upright Bagless Vacuum (35961, 3595X, 3596).
6. BISSELL Style 32R9 Circular Vacuum Filter Pack
- Includes one inner pleated filter and one outer foam filter.
- Fits into the dirt cup of the cleanview helix series, rewind series and powerforce series, check model for exact fit recommendations.
- Did you know that your vacuum has filters that should be checked out frequently? Depending on your household, it is recommended that you replace your vacuum filters every 3 to 6 months. regular replacement of your filters helps your vacuum operate at peak efficiency.
- Refer to you BISSELL vacuum user guide for replacement instructions.
- See description below for vacuums that fit this accessory!
Genuine BISSELL parts. Includes 1 inner pleated filter and 1 outer foam filter. This filter pack includes one inner pleated filter and one outer foam filter. It Works with PowerForce Vacuums (6584, 47M6H, 47M6Y, 65792, 6579R, 6583P, 65841, 65842, 65843, 6584R, 6579, 65793, 65823, 6582R, 6583, 65831, 65832, 65833, 65834, 6583F, 6583G, 6583R, 6583W, 6583X, 6582, 65851, 6585, 65852, 65853, 65854, 65856, 65857, 6585R, 6596Q, 6596X, 6594F, 6594G, 6594J, 6594R, 6594W, 6596, 6596R, 6594, 84G9) PowerClean Vacuum (62X5) Rewind Vacuums (58F83, 18M9, 18M9P, 118M9V, 26T55, 58F8R, 18M9X, 58F8, 58F8T, 18M9W, 26T5, 67F8, 44M3, 44M3P, 44M3R, 67F82) CleanView Vacuums (35766, 3576M, 95P1, 82H1H, 82H1M, 82H1R, 82H1T, 21k3, 21K31, 21K32, 21K35, 71V9, 82H1, 71V92, 3574, 20Q9, 3576, 35762, 35741).
7. Kreg Jig K4 Pocket Hole System
The Kreg Jig® K4 is the perfect choice for do-it-yourselfers and anyone new to pocket-hole joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig® K4 can help you finish the job in less time, and with far less effort than you ever thought possible. Its simple design gives you the confidence you need to get started, and you’ll have your project finished in no time with joints as easy as “Drill. Drive. Done!”
From the Manufacturer
The Kreg Jig is the perfect choice for DIY’ers and anyone new to pocket-screw joinery. Whether you’re building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project and with joints as easy as “Drill. Drive. Done!” You’ll actually want to finish it. The Kreg Jig makes every joint you build faster and stronger, but perhaps more importantly, it makes them easier. Simple two-step operation, combined with easy thickness adjustments, built-in depth-setting-gauges, a large clamping recess and our patented 3-hole drill guide, make this the most easy-to-use Kreg Jig we’ve ever made. Includes everything you need to get started with pocket-screw joinery, including Kreg Jig, stepped drill bit, 6-inch square driver, dust collection shroud, starter screw set, starter plug set, skill builder DVD and quick-start guide, all inside a compact and durable carrying case.
8. Dirt Devil F3 HEPA Vacuum Filter, 3250425001
9. Royal Dirt Devil 3250435001 Filter, F3 Round Pleated Dirt Cup 082500/SD40005
F3 round pleated dirt cup filter is designed to fit royal 082500 and SD40005 model vacuums. Fits breeze and Jaguar canister 082550, 082500, 082505, 082570, 082580, F3 and SD40005. The country of origin of the product is China. The brand name of the product is: royal Appliance mfg company
10. 15in Stealth Vacuum Head and Telescopic Wand
The new Stealth Brush has improvements including a new short cord that plugs into the all new Stealth Wand. The old style Stealth had a 40″ cord that ran up the metal wands. The new one handsomely integrates the cord into the telescopic wand. Stealth is now ONLY AVAILABLE with its new wand. Upgrading an older system? A compatible hose is all that is necessary. The Electric Hose from M.D. Manufacturing, Inc. will fit, as well as all older Stealth, Ace, EdgeLift, BlackHawk, most Nutone, and others. If there are two inches between the button lock nipple on the hose end and the two holes where the pins go into the hose handle, the new Stealth with Wands will fit perfectly.
By our suggestions above, we hope that you can found Ace Central Vacuum Kit for you.Please don’t forget to share your experience by comment in this post. Thank you!