Nowadays, there are so many products of 3d print head cooling fan in the market and you are wondering to choose a best one.You have searched for 3d print head cooling fan in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3d print head cooling fan which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
588 reviews analysed
1. ANVISION 2-Pack DC 24V 40mm x 10mm Brushless Cooling Fan, Dual Ball Bearing, YDM4010B24
- Rated Voltage: 24V DC, Current: 0.06A
- Bearing Type: Dual Ball Bearings, low noise, long life:50000H
- Airflow: 5.07CFM, Air Pressure: 2.45mmAq, Speed: 6000PRM, Noise: 23.20dBA
- Lead Wire: fit in 2-PIN-2.5mm connector, length: 150mm / 5.90inch, Dimension: 40mm x 40mm x 10mm
- Warranty: 2-years, Package: 2x 24V DC brushless fans
Housing: Black PBT (UL94V-0)
Fan Blade: 7 Blades, Black PBT (UL94V-0)
Bearing System: Two Ball Bearings
Net Weight: 13.7g
Rated Voltage: 24V DC
Operating Voltage Range: 21.6-26.4V DC
Start-up Voltage: 14.0V DC
Rated Current: 0.06A
Rated Speed: 6000PRM
Air Flow: 5.07CFM
Air Pressure: 2.45mmAq
*Noise Level: 23.20dB(A)
Life Expectancy: 50000H at 25degree test
*Acoustical Noise Testing Condition: Fan is hanged in anechoic chamber, noise is measured at rated voltage in anechoic chamber with microphone at a distance of 1 meter formthe air intake.
2. 3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)
- ❃❃ Power Connection: 2 Pin-ph2.5
- ❃❃ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup.
- ❃❃ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation.
- ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern.
- ❃❃ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 24V, 0.06A.
3. Wangdd22 E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
- Applicability & compatibility: compatible with all 1.75mm E3D V6 Makerbot 3D printer
- NTC connector with terminal, easy to intall
- Anti-leakage & anti-blocking design: extruder nozzle connect connect with the tube seamless, prevent print material from leaking or blocking
- Heat resistant & ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, 304 stainless steel material nozzle throat and high quality resistor whose temperature can up to 280°C, 12V high speed fan, radiating quickly
- Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm
- Package include: all metal V6 hotend 12v/40w/1.75mm/0.4mm extruder full kit(V6 print head + fan + fan cover + PTFE tube + tube fitting ), 3 Pcs brass extruder nozzles(1×0.3mm/1×0.4mm/1×0.5mm), and a v6 heating block, 2Pcs teflon tube within stainless steel nozzle throat
Please recognize the seller: Wangdd22
Compatibility: compatible with all 1.75mm V6 E3D Makerbot 3D printer.
Notice: Small parts, keep away from children
12V/40W heater,temperature can be up to 280°C（Long-term temperature: 240°C/ short-term temperature: 280°C）
12V high speed fan with shroud, radiating quickly
One meter long PTFE/teflon tubing 4mm OD 2mm ID
PC4-01 tube fitting
A v6 heating block
Outer thread : M6 M7
Throat outer diameter: 6mm
Throat inner diameter: 4mm
Teflon pipe inner diameter: 2mm
Length of nozzle throat: 22.5mm
Filament diameter : 1.75mm
Extruder brass nozzle input diameter: 1.75mm
Extruder brass nozzle output diameter: 0.3mm 0.4mm 0.5mm
1 x all metal V6 hotend 12V/40W/1.75mm/0.4mm nozzle/ extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 x PC4-01 Tube Fitting
1 x 0.3mm nozzle print head
1 x 0.4mm nozzle print head
1 x 0.5mm nozzle print head
1 x V6 heating block
2 x teflon tube within stainless steel nozzle throat
4. 4 PCS 3D Printer Blower Cooling Fan, 5015 Cooling Fan 50mm x 50mm x 15mm Fan for Hotend Extruder Heat Sinks with 2 Pin Terminal(12V 0.18A)
- ✹✹ Power Connection: 2 Pin-ph2.5
- Low noise while cooling the hot end of heatsinks.
- ✹✹ DC 12V 50mm Blower Cooling Fan Hotend Extruder Turbine Fan for cooling heatsinks on hot ends, prints, or other cooling needs.
- ✹✹ Easy to cool the filament that is deposited on your print. Cooling your print can make the difference between a beautiful print and a failed print.
- ✹✹ Size:50mm*50mm*15mm(L*D*H), Speed:6500±10%RPM, Noise:25dBA, Bearing: oil, DC 12V, 0.18A.
- ✹✹ Note: New & Old Version is shipped randomly.(Any questions, you can contact us and we will give you a satisfied solution!).
5. Wangdd22 3D Printer J-head Hotend with Fan for 1.75mm 12v V6 Direct Filament Wade Extruder 0.4mm Nozzle+Volcano kit
6. DAOKI 5 PCS 12V 404010mm Cooling Fan for 3D Printer Parts Reprap Prusa I3
Voltagte: DC 12V
Size: 40mm x 40mm x 11mm
5 x 12V DC Brushless 40mm fan
7. Micro Swiss All Metal Hotend Kit for Creality CR-10 / CR10 / CR10S / Ender 2 / Ender 3 Ender 5 Printers .4mm
- Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S
- Orifice size: .4mm
- Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
- This is a Drop in All Metal Conversion Kit for CR-10 printers
- Made in USA by Micro Swiss
8. Cooler Master Rifle Bearing 80mm Silent Cooling Fan for Computer Cases and CPU Coolers
9. 24V 2 Pin Extruder Brushless Cooling Fan For 3D Printer For RepRap Mendel Prusa
-100% Brand New.
-24V DC Brushless 40mm fan
-Excellent for keeping electronic components or extruder cool to prevent any damage.
-Indispensable to cool the print heads or engines that tend to heat through.
1 x 3D Printer Cooling Fan
Size:40 x 40 x 10mm
Country/Region of Manufacture:Hong Kong
MPN:Does not apply
10. Genuine E3D V6 All-Metal HotEnd 1.75mm Universal w/ Bowden Full Kit 12V (V6-175-B)
The E3D V6 Hot End: Smaller, Easier, High Performance 01. Print the Widest Possible Range of Materials Our signature all-metal design allows you to reliably print high temperature materials, and we’ve added extra functionality with soft and flexible filaments. This opens up a huge range of new opportunities for your printer. 02. High Temperature Performance The V6 can comfortably reach 285°C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) or PT100 you can reach over 400°C. This not only allows you to print extremely high temperature materials like Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated with PEEK/PTFE designs. The PTFE filament guide inside the V6 HotEnd is never subjected to high temperatures, so there is no risk of damage through overheating. 03. Compact We’ve focussed on cutting as much bulk from the E3D V6 as possible. This means an overall length of just 62mm, and low bulk in X/Y dimensions! 04. Easy to Use Our new thermistor cartridge simply slides into place and is secured with a single screw. We use high temperature glass sleeving to insulate the thermistor legs as well. This makes installing or removing the thermistor a quick and clean process compared to previous methods involving fiddly taping. 05. High Quality Printing We’ve kept our sharp thermal transition that gives the high quality printing performance users have come to expect from E3D HotEnds. A sharp thermal break gives better control over filament output so you get more immediate start and stops when extruding as well as retracts that are more effective in combating ooze. This means sharper, more accurate prints that have less stringing, oozing or blobbing.
By our suggestions above, we hope that you can found 3D Print Head Cooling Fan for you.Please don’t forget to share your experience by comment in this post. Thank you!